Feed Rotor Section - Horizon Fitness AFC-566F Manual

1-1 Machine Description

1-1-6 Feed Rotor Section

Feed Rotor
This pulls against the leading edge of the sheet.
The vacuum operates through the oval-shaped
holes on the outside of the rotor.
Double Feed Detect Ultrasonic
Sensor
This is the sensor for double (multiple)
feed detection. If this sensor detects dou-
ble feeding, the machine stops the folding
operation.
Front Air Nozzle
When feeding heavy sheets, extra air can
be supplied here to help the feed rotor.
Feed Table Sensor Adjusting Knob
When this knob is turned clockwise, the table sensor is
raised.
Feed Table Sensor
This sensor detects the top of the stack.
The standard distance between the feed
rotor and the top sheet is about 9 to 11 mm.
6
Valve Housing
This housing pulls the air from the
side of the feed rotor.Changing the
position of this valve housing can
change the grip position on the sheet.
Double Feed Detect
Photoelectronic Sensor
This is the sensor for double (multi-
ple) feed detection. If this sensor
detects double feeding, the machine
stops the folding operation.
Double Feed Stop Plate
Normally you should not have to change this
setting. If double feeding occurs repeatedly,
move this plate to the higher position.
Double Feed Stop Plate Adjusting Knob
Table Sensor
When the feed table Down button is pressed, the table lowers
until it reaches this sensor.
When there are sheets on the table and the Down button is
pressed, the table stops with the top of the stack even with the
sensor. Press Down again to lower the table all of the way.
1-1-6
Feed Rotor Section