Feed One Sheet In Setup Mode - Horizon Fitness AFC-566F Manual

4-2

Feed One Sheet in Setup Mode

Press the Setup - Guide - Buckle tab
on the screen.
Press Setup Mode.
The Feed Start button blinks.
Press the Feed Start button.
The feed rotor turns, and the fold rollers and
transport belts start to move.
Press the Test Feed button, then
press the Feed Stop button immedi-
ately.
- One sheet feeds and stops in the register guide
section.
If double feeding or misfeeding occurs, refer to
section 6-1, "If an Error Icon Appears on the
Screen", and adjust the feed section again.
See page 97 for details.
Feed a sheet by pressing the Normal Jog
button and check that the sheet is aligned
correctly with the register guide. If the sheet
is not aligned with the register guide, replace
the plastic balls with steel balls, or increase
the number of balls. If the sheet hits the regis-
ter guide too hard and is bent, decrease the
number of balls, or replace the steel balls
with plastic balls.
58
Setup - Guide - Buckle Screen
The near side of
the sheet is
aligned correctly.
Register Guide
23051
40201A1
23051
40201B1
23051
40201C1
2
1
23051
40201D1
23051
40201E1