Fold Roller Unit - Horizon Fitness PF-P330 Manual

1: Mechanism
1-6

Fold Roller Unit

Solenoid ON = When the deflector is Up.
-
When the solenoid turns ON, the deflector
goes up and closer to the third roller.
- The sheet that comes through the second
and third roller goes under the deflector and
is delivered. (As shown with the arrow to
the right.)
Solenoid OFF = When the deflector is Down.
- When the solenoid turns OFF, the deflector
lowers and makes a space between the
deflector and the third roller.
- The sheet that comes through the second
and third roller goes over the deflector, then
goes to the second buckle chute through
the third and fourth roller.
1
Mechanism
2
Roller Lever
3
4 2
3
4 2
1-6: Fold Roller Unit
The gap between the first roller and guide plate
= 1 mm (0.04")
1
[CHECK]
Remove the second and fourth rollers.
1
1mm
After removing the rollers, raise the buckle
2
(0.04")
fixing lever and reset the roller lever level.
(If the buckle fixing lever is left lowered, the roller
lever pushes the guide plate up.)
3 Insert an 1 mm (0.04") allen wrench from the
infeed side, and check the gap.
Guide Plate
Buckle
Chute
Side
5 3 1
4 2
Vacuum Rotor
1-7