Installation; Machine Installation; Placing The Machine - Horizon Fitness AFC-566F Manual

8-1

Machine Installation

WARNING
-This machine weighs 1,170 kg (2580 lb). Be
very careful when moving this heavy machine.
-Place the machine on a solid and flat floor.
If the floor is not solid enough, place strong
plywood on the floor for support.
-Do not connect the power cable to your distri-
bution board until all the wiring connections in
the machine are complete. Otherwise an elec-
tric shock can cause severe personal injury.
-Attach the ground wire.
CAUTION
- Avoid direct sunlight.
- Avoid hot and humid locations.

8-1-1 Placing the Machine

Prepare enough installation space for machine operation, daily checks, sheet
replacement, and maintenance.
- Allow about 500 mm (19.7") on all sides of the machine for maintenance.
642(25.3")
Conveyor Parallel Folding
1,320
(52.0")
698(27.5")
3,260(128.4")
4,580(180.4")
Insert the leveling bolts.
- Insert four bolts into the slots on the bottom
of the machine.
Place the mounts under the leveling
bolts.

8. Installation

700(27.6") 460(18.2")
1,050
2,390
(41.4")
(94.1")
500(19.7")
5,080(200.0")
Unit: mm(inch)
Center of Gravity
Power: From customer's
power source
642
(25.3")
700 (27.6")
Cross-Folding
500(19.7")
600
(23.7)
3,260(128.4")
4,260(167.8")
Lock Nut
Leveling Bolt
Mount
23051
80101C1
460(18.2")
1,050
(41.4")
2,872
(113.1")
1,180
(46.5")
500(19.7")
23051
80101A1
13092
80101D1
139