Setting The Fold Pattern And Sheet Size - Horizon Fitness AFC-566F Manual

3-2

Setting the Fold Pattern and Sheet Size

There are two ways of doing this:
A: Set the fold pattern and sheet size for a new job.
Recall a saved job.
B:
A: Set the fold pattern and sheet size for a new job.
Set the fold pattern and sheet size using the Fold Pattern
screen.
Select the fold pattern.
If the folding pattern you wish to start is not listed
among the seventeen available patterns, press
on the screen.
If is pressed, the sheet is reversed.
If is pressed, the deflector in buckle chute 1
is set to reverse the sheet.
When is pressed, the fold patterns,
, ,and cannot be selected.
X
Input the sheet size.
- Press the value box, and the Numeric Keypad
screen appears. Enter the sheet size.
Max.: 850.0 x 558.0 (mm) (34.0 " x 21.965 ")
Min.: 148.0 x 128.0 (mm) (5.830 " x 5.040")
Press
OK
tern screen.
The selected fold pattern and the input sheet
size are entered.
If 8-page cross fold, 12-page cross fold or 16-
page cross fold is selected, the Register Mark
Position Entering Screen is displayed. If another
custom fold pattern has been selected, the
Sheet Insertion Instruction screen appears on
the display. Go to step 5 on the next page.
Enter the register mark position.
The register mark is
entered automatically,
but should be changed
if necessary.
38
(See page 40)
X
on Set-up Fold Pat-
Setup - Fold Pattern Screen
After entering the settings, press OK.
Fold Pattern
X
23051
30201A1
Input Sheet Size
Press OK to return
to the values that
were originally dis-
played.
23051
30201J1