Horizon Fitness AFC-566F Manual page 131

6-9 General Folding Problems and Remedies
Rolling
The inner edge is bent, folded, and is pulled into the roll-
ers.
Curl the front edge of the sheet on
the feed table in the opposite direc-
tion so that the edge will not be
pulled into the roller.
Reduce the distance between the
buckle chute and the roller,
page 87 and pull back the
gate a little.
Sheet Feeding
Direction
Wrinkles Crossing the Fold Line or Wrinkles
Spreading from the Fold Line
If a wrinkle occurs near the front edge of the sheet, the
sheet might be opening a bit as it moves through the
register guide section.
Install the sheet holders.
page 50
Reduce the number of transport
balls, use lighter balls, and rearrange
the balls.
page 50
If the wrinkles spread from the fold line -
The gap pressure for the feeding
roller is too strong. Increase the gap.
page 86
Problem:
A
121