Horizon Fitness AFC-566F Manual page 128

6-9 General Folding Problems and Remedies
Z Shaped Folding
Clean the fold rollers.
Increase the gap at roller A, or
reduce the gap at roller B.
Move the buckle chute closer to the
roller, by 2mm(0.08"),
or pull back the gate by 3mm(0.12").
When folding thick sheets, Z shaped folding might occur
even if the gap at roller A is too loose.
Midstream Folding
Check that the pressure produced
by roller A is not too strong.
Increase the gap inside the buckle
chute.
Check to see whether there is paper
dust in the buckle chute. This can
prevent a sheet from entering.
118
page 87
A
B
page 86
Problem:
A
Gate
B
A
B
Problem:
B
A