Horizon Fitness AFC-566F Manual page 103

5-1 Set up the Main Screen
Set the knife delay time.
- The longer the level bars in the display, the
longer the knife time delay.
- The feed interval is automatically made
longer when the knife delay time is set longer.
- When the knife delay time is set to the mini-
mum, the knife operates at the moment when
a sheet hits the knife stopper.
Set the double feed detection.
: Double feeding is not detected.
: Double feeding is detected by the
ultrasonic sensor. Two-part form can-
not be detected correctly by this sen-
sor. In that case, use the
photoelectronic sensor.
: Double feeding is detected by the
photoelectronic sensor. According to
the printed condition (paint or color),
this sensor may misdetect the double
feeding. In that case, use the ultra-
sonic sensor. (Select this when you
are using the folded sheets.)
Icons below are display only when photoelectric detec-
tion is selected.
/ Set the brightness of the double feed
detecting lamp. When detecting thick sheets (100 gsm
or thicker) or sheets with lots of dark printing, use the
brighter setting.
Set the sensitivity of the double feed
detection.
The bigger the level bar is, the higher the sensitivity.
- If the sensor misdetects the correct feeding as dou-
ble, decrease the sensitivity.
- If double feeding is not detected and passes through,
increase the sensitivity.
Main - Condition Screen
Main - Condition Screen
23051
50102E1
23051
50102F1
93