Setting The Conveyor Section - Horizon Fitness AFC-566F Manual

3-9

Setting the Conveyor Section

Install the conveyor in the correct
position for the fold pattern.
- Install the conveyor in position to receive the
folded sheets.
Adjust the height and the angle of
the conveyor to match the delivery
position of the folded sheets.
- Angle a conveyor table a little, so that the tail
end of the sheet falls and it is delivered
smoothly without interrupted by the next sheet.
- To adjust the angle of the conveyor table, turn
the angle adjusting knob lifting the table a little.
54
Knife Folding
Parallel Folding
Height Adjusting Wheel
Angle Adjusting Knob
23051
30901A1
23051
30901B1
23051
30901C1