Horizon Fitness AFC-566F Manual page 65

3-9 Setting the Conveyor Section
Set the catch rollers to match the
length of the delivered sheet.
- Set the catch rollers so that each delivered
sheet is immediately held between the catch
roller and the transport belt.
Set the conveyor switch to Run.
- If the speed adjusting knob is set to LOW (fully
counterclockwise), the conveyor does not drive.
Turn the knob to the middle position at least.
Now the basic setup is complete. See Chapter 4 for
instructions on fine adjustments.
Catch Roller
Locking Knob
Speed Adjusting Knob
Conveyor Switch
23051 13071
30901D1 30901D1
SPEED CONTROL UNIT
POWER
ALARM
LOW HIGH
RUN STAND-BY
23051
30901E1
55