1-2
Touch Panel Description
1-2-7 Set Up - Register Mark Position Entering Screen
You can enter the values for register mark position.
Go back to the Setup - Guide-Buckle Screen
When you press this button, the guides and buckle shutes do not move
tot match the changed register mark position.
24
Entering a Value
When you want to change the value, press
this area to open the Numeric Keypad
screen. Enter a new value. After entering a
new value, press
to set the guides and
O K
buckle chutes automatically to match the
new register mark position.
Default Button
When you press this button, the following
screen is displayed.
: Press this to return the values to
O K
the default.
: Press this to carry over the values to
indicated on the screen.
Register Mark Position
EnteringScreen
23051
10207D1