6-7
Problems in the Knife Section
6-7-4 The folded edge of the signature swells up
Check
The gap for the
fold roller (on the
side with the
folds) is too wide.
6-7-5 The knife does not work
Check
The knife func-
tion is turned off.
The knife servo
amplifier circuit
breaker (Q40) is
switched off.
6-7-6 The roller below the knife does not rotate
Check
The motor circuit
breaker below the
knife (Q12) is
switched off.
Cause and Recovery
- Reduce the gap on the side with the folds.
23051
60502B1
Cause and Recovery
- Turn on the knife function using the manual
setup on the Setup - Guide - Buckle screen.
23051
60705A1
- Switch on the circuit breaker.
23051
60705B1
Cause and Recovery
- Switch on the circuit breaker.
23051
60706A1
Page
page 77
Page
page 40
page 14
Page
page 14
113