Setting The Knife Fold Section - Horizon Fitness AFC-566F Manual

4-8

Setting the Knife Fold Section

Check the position of the side guides and the knife
stoppers in relation to the sheet.
Feed one sheet in Setup Mode.
(Press 1, 2 and 3 shown to the
right.) Next, press the Feed Stop
button (4).
- The sheet stops in the register guide section.
Press the Emergency Stop button.
Move the sheet to a point just before
the knife guide using the handwheel.
Check the gap between the sheet
and the front knife guide.
Standard gap is 0.5 mm to 1.0 mm (0.02" to 0.04"). If
the gap is not within this range, adjust the value for
the front knife guide on the Setup-Guide-Buckle
screen.
- If the or button for the front knife
guide is pressed, the rear knife guide is also
adjusted in the same direction.
- If the or button for the rear knife
guide is pressed, only the rear knife guide is
adjusted.
2 4
1
3
Knife Guide
Setup - Guide - Buckle Screen
23051
40801A1
Handwheel
23051
40801B1
Gap
23051
40801C1
23051
40801D1
75