1-1
Machine Description
1-1-15 Pump Section
To Feed Rotor
To Feed Rotor
To Feed Rotor
Pressure Gauge
This gauge is used to check the air
pressure. Control the air pressure
using the pressure regulator knob. In
normal use, this is set to about 0.03
to 0.04 MPa (4.5 to 6 psi). Do not set
the air pressure higher than 0.07
MPa (10 psi).
To Front Air
Vacuum Regulator Knob
Vacuum Gauge
This gauge is used to check the vacuum.
Control the vacuum using the vacuum regula-
tor knob. In normal use, this is set to about
- 0.04 MPa (-6 psi) with a sheet pulled
against the suction head. Do not set the vac-
uum lower than -0.07 MPa (-10 psi).
To Suction Head
(Blower, Separation Air)
To Suction Head
To Suction Head
To Suction Head
(Vacuum Piston)
(Vacuum Piston)
(Vacuum Piston)
Pressure Regulator
Knob
1-1-15
Pump Section
23051
10115A1
15