Perforation And Scoring Section - Horizon Fitness AFC-566F Manual

1-1 Machine Description

1-1-10 Perforation and Scoring Section

Using Thin Scoring Groove
Upper
Scoring
Wheel
Lower
Scoring
Wheel
Drive Rollers (4pcs)
These rollers drive each sheet.If
the sheets curl because of per-
forations, install upper and lower
drive rollers to correct the curl.
Perforation Shaft Lifting Lever
Turn this lever in the direc-
tion shown by the arrow to
lift the upper perforation
shaft.
This lever is installed on both the front and
the rear. Use the levers when you adjust
the positions of the perforation blades and
the scoring wheels.
Blade Holder A
Perforation, and Scoring Blade -
Install the blades as required.
Perforation Blade
6 mm x 4 mm Normal
(0.236" X 0.157")
Perforation Blade
2.5 mm x 0.8 mm Normal
(0.098" X 0.031")
3.2 mm x 0.8 mm Option
(0.126" X 0.031")
1.4 mm x 0.8 mm Option
(0.055" X 0.031")
Slitter Blade
Diameter 54 mm (2.13") Option
Diameter 52 mm (2.05") Option
Diameter 51 mm (2.01") Option
10
Using Thick Scoring Groove
Blade Holder B
Upper
When aligning the upper and lower scoring
Scoring
wheels, raise the upper and lower perfora-
Wheel
tion shafts so the wheels do not hit.
Lower
Scoring
Wheel
See 1-2-8 for details.
The sharp edges of the blades can cause severe
personal injury. Wear cutting proof gloves or wrap
the blade with cloth when handling.Also, install/
remove the blades after pressing the Emergency
Stop button.
Install the blades with the correct orientation on
the shaft (facing the right way).
Each blade is split into two halves, and is supplied this
way. Always use the two halves together.
Perforation and Scoring
Section
Drive Rollers
WARNING
23051
10110A1