Appendix 9-1 Specifications - Horizon Fitness AFC-566F Manual

9-1 Specifications
Machine Structure 6KTT(6 Buckles + Fold Knife + 2 Buckles Below Knife)
Max.Sheet Size Max. 558(W) x 850(L) mm or 21.965" x 33.460"
(Length 1,100 mm or 43.310" with optional extension table)
Min. Sheet Size Min. 128(W) x 148(L) mm or 5.040" x 5.830"
(Register guide minimum set position: 74(W) mm or 3.0")
Sheet Weight Range Normal Paper 35 to 244 gsm
Buckle Fold Length 1st Buckle - 30 to 450 mm or 1.2" to 17.7" / 2nd Buckle - 30 to 450 mm or 1.2" to 17.7"
3rd Buckle - 30 to 450 mm or 1.2" to 17.7" / 4th Buckle - 30 to 360 mm or 1.2" to 14.1"
5th Buckle - 30 to 450 mm or 1.2" to 17.7" / 6th Buckle - 30 to 360 mm or 1.2" to 14.1"
K1 Buckle 30 to 150 mm or 1.2" to 5.9"
K2 Buckle 30 to 150 mm or 1.2" to 5.9"
Knife Fold Size Max. 558(W) x 410(L) mm or 21.9" x 16.1" [Knife Length: 410mm or 16.1"]
Min. 160(W) x 30(L) mm or 6.3" x 1.2" [190(W) mm or 7.5" with automatic set-up]
On manual setup: 80 mm or longer of the dimension between sheet edge from Fold Knife is necessary.
On automatic setup: 95 mm or longer of the dimension between sheet edge from Fold Knife is necessary.
Feeding Mechanism Air Suction Rotor and 2 Cylinder Separator Head (Feed interval and suction time are adjustable.)
Feeder Stack Height Max.740 mm or 29.1" [within 250kg or 551.3lb.]
Belt Speed 30 to 240 meters or 99 to 787 feet per minute, Knife Fold 200 meters or 656 feet per minute
Production Speed Suction Head 42,000 cycles per hour, Knife 21,000 cycles per hour
Standard Fold Roller Combination of soft polyurethane foam rubber and steel roller Optional side cut blades can be
attached to the roller.
Parallel Fold (Diameter 52 mm) Cut: 6 mm or 0.24" Blank: 4 mm or 0.16"
Perforation
Perforation Cut: 2.5 mm or 0.1" Blank: 0.8 mm or 0.03" [Option: Cut 3.2 mm or 0.13", Blank 0.8 mm or 0.03" / Cut
1.4 mm or 0.06", Blank 0.8 mm or 0.03"]
Min. Perforation Distance: 40 mm or 1.58" in one operation
Scoring Scoring Width: About 1mm or 0.04" (Depends on sheet type) Lower roller with soft polyurethane foam
rubber
Cutters Standard: 3 Perforation Blades / Max.12 blades can be attached.
Automatic Setup Accuracy
Setting Dimension:
Vacuum Pump
Flow 40m
10% 50 or 60Hz
Power Consumption 1.8 / 2.2 kW (50 or 60Hz)
Voltage/Frequency 3-Phase 200 V, 50 or 60 Hz
3-Phase 220 V, 60 Hz
3-Phase 400 V, 50 Hz
Rated Current 3-phase 200 to 220 V, 50 or 60 Hz, 12.6 A
3-phase 400 V, 50 Hz, 5.6 A
3-phase 400 V, 60 Hz, 6.3 A
Heat Output 4,210 kJ or 1,010 kcal
Motors 0.75 kW x 1, 0.2 kW x 2, 25W x 1, 0.4kW x 1 (Servo), 2.2 kW x 1 (Pump)
Machine Dimensions 3,260(W) x1,050(D) x 1,580(H) mm or 128.4 " x 41.4" x 62.2 "
Conveyor 1,320(W) x 600(D) x 1,130(H) mm or 52.0" x 23.7" x 44.5"
Noise Level L
A
Machine Weight Main Body : 1,091 kg or 2,405.3 lb, Conveyor : 50 kg or 110.3 lb, Vacuum Pump : 50 kg or 110.3 lb,
Transformer : 70 kg or 154.4 lb
Temperature and Humidity Temperature 0 to + 40 degrees Celsius (32 to 104 degrees Fahrenheit ), Humidity 20% to 75%RH
9. Appendix
Art/Coated Paper 50 to 232 gsm
±
1mm Round Accuracy:
3 3
per hour (1400 ft per hour) Voltage / Frequency 3-Phase Delta Connection 230 / Y400V
eq : 84 dB (EN13023)
±
0.1mm
±
147