Buckle Chute Section - Horizon Fitness AFC-566F Manual

1-1 Machine Description

1-1-9 Buckle Chute Section

Gate Adjusting Knob
If the sheet is curled downward
and does not enter the buckle
chute, turn this knob to extend
the gate.
Buckle Stopper Adjusting Knob
This knob moves only the end of the stopper on the operator
side of the machine.The angle of the stopper is adjustable.
Locking Knob for Buckle Stopper Adjusting Knob
Loosen this knob to turn the stopper adjusting knob.
Fixed Knob
This knob is driven by a motor. Do not turn it by hand.
Gate Scale
Buckle Chute Locking Lever
When removing the buckle chute,
release the buckle chute using this lever.
Buckle Stopper and Deflector
This stopper is set automatically to match the sheet size
and fold pattern. The stopper setting position can be
adjusted on the screen.
Push down on the lever, and insert one
sheet between the lever and the knob.
Turn this adjusting knob to adjust all of
the roller gaps at once. The roller gap
will be increased if the knob is turned
clockwise. Press the Thickness Cali-
bration button, and then press the
Adjusting Start button to reflect the
adjusted thickness to the roller gap.
(See page 25.)
Sheet
0 -1
0.2mm
(200 m)
23051
10109A1
1-1-9
Buckle Chute Section
Gate
Sheet Thickness Detector
Adjusting Knob
Lever
9