Horizon Fitness AFC-566F Manual page 82

4-7
Setting the Perforation Blades and Scoring Blades
Set the perforation blades and scor-
ing wheels in the operating posi-
tions.
Perforation blade setup:
1. Turn the handwheel so that locking screw
comes to the position to be loosened.
2. Loosen the lower perforation holder, and adjust
the top of the lower blade to the operating posi-
tion, then tighten the holder using the set screw.
3. Loosen the upper perforation holder, and move
the blade on the upper holder against the lower
blade, and then tighten the assembly.
Set the upper and lower perforation blades so
they just touch each other.
Scoring wheel setup:
- Change the groove on the lower scoring wheel
depending on the sheet thickness. For thick
sheet, use the thick groove.
- To give thick scoring line, use two upper scoring
wheels.
1. Press the Emergency Stop button, and separate
the upper and lower perforation shafts.
- Lift the upper perforation shaft by turning the per-
foration shafts lifting levers. The levers are
installed on both the front and the rear.
Upper perforation
shaft is lifted.
Perforation Shaft
Lifting Lever
13071
40701P1
2. Loosen the upper scoring wheel, and adjust the
lower wheel holder to the operating position,
then tighten the holder using the set screw.
3. Turn the handwheel so that locking screw
comes to the position to be loosened.
4. Loosen the lower scoring wheel, and align the
groove of the lower scoring wheel with the posi-
tion of the upper scoring wheel, then tighten the
set screw.
5. Return the upper perforation shaft by turning the
perforation shafts lifting levers.
The quality of the perforating may change
depending on the sheet material and sheet
thickness. Adjusting the eighth roller gap can
change the quality of the perforating.
72
- If no perforation blades are installed, or if other perfora-
tion blades should be replaced, refer to section 7-7.
- To change the number of the perforation and scoring
blade, remove the perforation shaft referring to section
7-5.
Upper Blade
Lower Blade
Upper Scoring Wheel
Lower Scoring Wheel
Perforation Shaft
Lifting Lever
Return the upper
perforation shaft
13071
40701Q1
Upper Scoring Wheel
Lower Scoring Wheel
13071
40701F1