Adjusting The Positions Of The Buckle Stoppers At Once - Horizon Fitness AFC-566F Manual

4-5 Adjusting Parallel Shifts in Parallel Folding

4-5-2 Adjusting the positions of the buckle stoppers at once

If the last panel of the accordion-folded sheet is
longer or shorter than the setting, you can adjust the
positions of the buckle stoppers at once using the
accordion-fold adjusting function.
Press the Accordion-fold Adjusting
button on the Setup- Guide-Buckle
screen.
The Accordion-fold Adjusting screen is
displayed.
Enter the correction value. The cor-
rection value is the difference
between the setting and the actual
length of the last panel.
- Enter the value using the Numeric Keypad
screen.
- When the last panel is shorter than the buckle,
enter a negative value.
Press .
The set values for the buckle 1 through 6
are automatically recalculate and the
positions of the buckle stoppers are adjusted.
66
The last
panel is too
short.
Setup - Guide - Buckle Screen
Accordion-fold Adjusting Screen
The last
panel is too
long.
Adjusting the difference.
23051
40501C
23051
40401G1
23051
40401G1
Enter the correction value.