Horizon Fitness AFC-566F Manual page 84

4-7
Setting the Perforation Blades and Scoring Blades
Adjust the roller gap for the drive
rollers.
- Count the number of sheets that will pass
through the drive rollers. Insert this number of
strips into the gap adjusting lever. Adjust the
roller gap using the gap adjusting knob so that
the rollers turn slowly when the strips are pulled
out.
Check that the wheels do not inter-
fere with each other.
If not doing perforation and scoring
-Separate the upper and lower blades or wheels.
When not doing perforating or scoring, the
drive rollers are not used. Separate the upper
and lower drive rollers.
74
23051
40701K1
Perforation Blade
Position
Drive Roller
Scoring Blade
Position
Drive Roller
Position
13071
40701J1
23051
40701N1