Horizon Fitness AFC-566F Manual page 55

3-4 Loading the Sheets on the Table
Check the position of the feed scale
pin in relation to the stack.
- Insert the feed scale pin into the outer hole.
- Check that the feed scale pin just touches the
stack.
- If necessary, adjust the position of the table by
turning the feed table knob.
To move the sheets to the rear
(1) Increase the value for the "table guide" by
required amount using Guide-Buckle screen.
The table guide moves to the rear.
(2) Turn the feed table knob and move the sheet to
the rear.
To move the sheets to the front
(1) Turn the feed table knob and move the sheet to
the front.
(2) Decrease the value for the "table guide" by
required amount using Guide-Buckle screen.
The table guide moves to the front.
Position the sheet hold-down bars.
- If the sheets are thin or narrow, move the bars
inward.
- If the sheets are thick or wide, move the bars
outward.
If necessary, attach and adjust the air
guides.
- Set the guides to match the sheet size.
- When small size sheets are used, remove the
air guide.
Feed Scale Pin
Feed Table Knob
Sheet Hold-down Bar
Insert the feed
scale pin into the
outer hole.
Check that the
feed scale pin
just touches the
stack.
23051
30401G1
Locking Knob
Air Guide
23051
30401H1
45