Matching The Perforation Line To The Fold - Horizon Fitness AFC-566F Manual

4-6

Matching the Perforation Line to the Fold

There are two different procedures for matching the
sheet position to the fold knife position:
A: If you are doing perforating
B: If you are not using perforating
A: If you are doing perforating
Check that the perforation line matches the knife position.
Feed one sheet using Setup Mode.
- The sheet stops just before it is inserted into the
fold knife section.
Move the sheet to a point just before
the knife stopper using the Normal
Jog button.
Check that the perforation line is
aligned with the knife by viewing
from point A as shown in the figure
to the right.
- Adjust the positions of the blades following the
steps below, if necessary.
(1) Adjust the position of the perforation blade.
- Loosen the locking screw of the blade holder
and adjust the position of the blade right and
left.
(2) Adjust the position of the register guide so that
the perforation line comes on the fold position.
Setup - Guide - Buckle Screen
13071
40601D1
23051
40601E1
2
1
Knife Stopper
Blade Holder Locking Screw
3
23051
40601A
23051
40601B1
67