Disassembling And Cleaning The Pump Filter - Horizon Fitness AFC-566F Manual

7-2

Disassembling and Cleaning the Pump Filter

If the pump filter is clogged, the pump pressure will
not increase when the regulator knob is turned. Clean
the filter regularly and remove any clogged dust using
compressed air or a vacuum cleaner.
There are three filters installed as shown to the right.
Turn off the power switch.
Remove three screws and the cover
shown in the drawing to the right.
Remove the filters.
Remove any clogged dust in the
filter using compressed air or a
vacuum cleaner.
- If the dust cannot be removed, replace the
filter.
- Reinstall the filters in the original positions.
Install the filters and parts in the
reverse order of removal.
23051
70201A1
Cover
F1: Diameter 64 mm (2.5") Length 70 mm (2.8")
F2: Diameter 64 mm (2.5") Length 60 mm (2.3")
F3: Diameter 38 mm (1.5") Length 38 mm (1.5")
Filter
Cover
23051
70201B1
23051
70201C
125