4-12
Other Adjustments
4-12-2 Buckle gate adjustment
CAUTION
Adjust the gate within the range of the gate
scale. If the gate exceeds the gate scale, it
may hit the fold roller.
If the sheet can not enter the buckle chute easily,
adjust the buckle gate.
-Usually it is not necessary to adjust the buckle gate.
If the sheets are curled downward and do not enter
the buckle section, extend the buckle gate using the
gate adjusting knob.
-There are gate adjusting knobs on front and rear.
Adjust both knobs evenly.
-The center of the gate scale marks the standard gate
position.
-Thick sheets will not be folded correctly if the gate is
extended too far.
Gate Scale
Gate Adjusting Knob
Gate
Plate
Standard
Position
23051
41202A1
85