Windshield Wipers; Front Wiper; Front Wiper Washer Fluid; Rear Wiper - LeeBoy 695 Operation, Service And Parts Manual

WINDSHIELD WIPERS

Front Wiper

To turn on front wiper:
• Turn front wiper/washer fluid knob (Figure 4-10,1)
clockwise to first position for low wiper speed.
• Continue turning clockwise to second position for
high speed.
To turn off front wiper:
• Turn front wiper/washer fluid knob counterclockwise
to off position.

Front Wiper Washer Fluid

For washer fluid:
• Push in front wiper/washer fluid knob (Figure
4-10,1).

Rear Wiper

To turn on rear wiper:
• Turn rear wiper/washer fluid knob (Figure 4-10,2)
clockwise to first position for low wiper speed.
• Continue turning clockwise to second position for
high speed.
To turn off rear wiper:
• Turn rear wiper/washer fluid knob counterclockwise
to off position.

Rear Wiper Washer Fluid

For washer fluid:
• Push in rear wiper /washer fluid knob (Figure
4-10,2).
LeeBoy Model 695 Motor Grader

LIGHTS

Headlights

The headlights/parking lights switch (Figure 4-10,3) is
used to control operation of the headlights and parking

lights.

To turn on the parking lights:
• Push top end of headlights/parking lights switch to
middle position.
To turn on the headlights:
• Push top end of headlights/parking lights switch all
the way up to top position.

Beacon Light

The beacon light switch (Figure 4-10,6) operates the
flashing safety light on top of the canopy or optional cab.
This light warns traffic of slow moving equipment.
To turn on beacon light:
• Push top end of beacon light switch.
To turn off beacon light:
• Push bottom end of beacon light switch.

Front Work Lights

The front work lights switch (Figure 4-10,4) operates
the work lights mounted on the front of the motor grader.
These lights are used to illuminate the work area when
working at night.
To turn on front work lights:
• Push top end of front work light switch
To turn off front work lights:
• Push bottom end of front work light switch.

Rear Work Lights

The rear work light switch (Figure 4-10,5) operates the
rear work lights mounted on the canopy or optional cab.
These lights are used to illuminate the work area when
working at night.
To turn on rear work lights:
• Push top end of rear work light switch.
To turn off rear work lights:
• Push bottom end of rear work light switch.
Operation
4 4 4 4 4 4
4-11