Table of Contents
Advertisement
Maintenance
GENERAL INFORMATION
This section gives the procedures necessary for routine
and general maintenance on the LeeBoy Model 695
Motor Grader.
Follow all the Maintenance Schedules and Maintenance
Procedures to maintain the grader and ensure top
operating condition.
5-4
ROUTINE MAINTENANCE
General Information
Maintenance must be a planned program that includes
periodic grader inspection and lubrication procedures.
The first and most important requirement for satisfactory
motor grader performance is a clean grader. Many
failures in the field are due to equipment that has
become so covered with excess gravel and dirt
that even ordinary adjustments and lubrication are
neglected.
The operator of the motor grader should inspect the
grader daily. The operator is responsible for seeing
that worn or damaged parts are replaced or repared
to prevent damage to other areas of the grader. Daily
inspections should check for issues which could
cause a potential service or safety problem, including:
observation for loose bolts, fluid leaks, worn or damaged
hoses, and accumulation of debris or dirt.
The maintenance program must be scheduled based on
the grader "Operating Hours" which are recorded on the
hour meter or based on the "Periodic Schedule'' which
is typically done at the following time intervals:
•
Daily
•
Weekly
•
Monthly
•
Quarterly
•
Semi-annually
•
Yearly
LeeBoy Model 695 Motor Grader
Advertisement
Table of Contents
