Table of Contents
Advertisement
Safety
Alcohol and Drug Hazard
Never operate the machine while under the
influence of alcohol, drugs, or when ill.
Piercing Hazard
High-pressure hydraulic fluid or fuel can
penetrate your skin and result in serious
injury. Avoid skin contact with high-pressure
hydraulic fluid or diesel fuel spray caused by
a hydraulic or fuel system leak such as a
broken hydraulic hose or fuel injection line.
• If you are exposed to high-pressure hydraulic fluid or
fuel spray, obtain prompt medical treatment.
• Never check for a hydraulic fluid or fuel leak with your
hands. Always use a piece of wood or cardboard.
Have your authorized LeeBoy dealer or distributor
repair the damaged parts.
Flying Object Hazard
Always wear eye protection when cleaning
the LeeBoy Model 695 Motor Grader with
compressed air or high-pressure water.
Dust, flying debris, compressed air, pressurized water or
steam may cause eye injury.
Coolant Hazard
Coolant must be handled properly to ensure
operator safety.
• Wear eye protection and rubber gloves when handling
engine coolant.
• If contact with the eyes occurs, flush eyes with clean
water for 15 minutes.
• If contact with skin occurs, wash immediately with
soap and clean water.
Burn Hazard
Some of the machine's surfaces become
very hot during operation and shortly after
shutdown.
• Keep hands and other body parts away from hot
machine surfaces.
• Handle hot components with heat-resistant gloves.
1-6
The safety messages that follow have CAUTION level
hazards.
Poor Lighting Hazard
The work area must be well lit to ensure safe and proper
operation.
• Ensure that the work area is adequately illuminated.
• Always install wire cages on portable safety lights.
Tool Hazard
Always use tools appropriate for the task at hand and
use the correct size tool for loosening or tightening
LeeBoy machine parts.
The safety messages that follow have NOTICE level
hazards.
Any part which is found defective as a result of
inspection or any part whose measured value does not
satisfy the standard or limit must be replaced.
Always tighten components to the specified torque.
Loose parts can cause damage to the LeeBoy
machine or cause it to operate improperly.
Only use replacement parts approved by LeeBoy.
Other replacement parts may affect warranty
coverage.
Follow the guidelines of the EPA or other
governmental agencies for the proper
disposal of hazardous materials such as
engine oil, diesel fuel, and engine coolant.
Consult the local authorities or
reclamation facility.
Dispose of hazardous materials in accordance with
all applicable laws and regulations. Never dispose of
hazardous materials by dumping them into a sewer, on
the ground, or into groundwater or waterways.
LeeBoy Model 695 Motor Grader
Advertisement
Table of Contents
