LeeBoy 695 Operation, Service And Parts Manual page 15

Thank you for purchasing the 695 Motor Grader. We
wish you many years of safe and efficient operation of
your motor grader.
READ THIS MANUAL PRIOR TO OPERATING the unit.
This manual is an important part of the motor grader
and should be kept with the motor grader at all times in
the dedicated storage container on the motor grader.
Even though you may be familiar with similar equipment,
you MUST read and understand this manual before
operating this motor grader. Reading the manual will
help you and others avoid injury and help prevent any
damage to the motor grader. If this manual becomes lost
or damaged, contact your authorized LeeBoy dealer
immediately to order a replacement (Contact
Information on page 2-4).
This manual is intended as a guide for the safe and
efficient use of the motor grader. This manual covers the
procedures for proper operation and maintenance of
the motor grader. This manual contains information that
was available at the time of printing and are subject to
change without notice.
This manual should be used with all related
supplemental books, engine and transmission manuals,
and parts books. Related service bulletins should be
reviewed to provide information regarding some of the
recent changes.
If any questions arise concerning this publication or
others, contact your local LeeBoy dealer for the latest
available information.
VT LeeBoy, Inc. is proud to be ISO 9001 certified. The International Standards
Organization (ISO) establishes guidelines to ensure that products and
services are safe, reliable and of good quality. ISO certifies companies who
demonstrate compliance with all aspects of product safety, customer
satisfaction, efficiency, environmental stewardship and social responsibility.
Our teams work hard to deliver quality industrial machines that exceed
customer expectations and we strive for continuous improvement in
everything we do. The VT LeeBoy family of companies is committed to
total quality management with a strong focus on meeting customer needs.
VT LeeBoy, Inc., is also proud to be an accredited ANAB manufacturer,
which is a certification process comprised of quality standards established
by the American National Standards Institute (ANSI) and the American
Society for Quality (ASQ). The ANSI-ASQ National Accreditation Board
plays an important role in ensuring the safety and quality of goods and
services, along with protecting the environment.
This manual provides information for use by the
equipment operator under the following headings:
Safety—See Section 1 for important safety guidelines
information.
Information—See Section 2 for important warranty,
contact, and nameplate information. Section 2 also
contains all major system specifications and typical
torque value tables.
Component Location—See Section 3 for general
overview of controls and major components.
Operation—See Section 4 for control functionality and
normal equipment operation.
Maintenance—See Section 5 for basic preventive
maintenance, repair, and troubleshooting procedures.
Schematics—See Section 6 for schematic diagrams of
electrical wiring.
Illustrated Parts List (IPL)—See Section 7 for
illustrations, descriptions, and part numbers of available
service parts.
Introduction
xv