Fuel System; Draining Fuel Tank - LeeBoy 695 Operation, Service And Parts Manual

Maintenance
Installation
1. Position the replacement radiator/oil cooler and
secure with mounting bolts and washers.
2. Install overflow hose and secure with clamp.
3. Install upper and lower radiator hoses and secure
with hose clamps.
4. Using tags created during removal, connect charge
air hoses and hydraulic hoses to radiator.
5. Fill radiator with coolant mixture consisting of at
least 50/50 mix of anti-freeze and water.
6. Inspect and test radiator cap (Figure 5-19).
Replace if necessary.
Radiator Cap
Figure 5-19. Radiator Cap
1 - Radiator Cap
7. Install grill, hood, and engine access panels.
8. Start engine and check operation. Repair leaks as
necessary.

FUEL SYSTEM

Draining Fuel Tank

Diesel fuel is highly flammable. Keep
all sparks and flames away when draining
fuel. Do not smoke while filling fuel tank or
working on fuel system.
To drain the fuel tank:
1. Refer to Preparing Grader for Maintenance on
page 5-6 and park grader.
2. Remove fuel tank filler cap (Figure 5-20).
5-24
Diesel Fuel Tank Filler Cap
Figure 5-20. Diesel Fuel Tank Filler Cap
3. Remove fuel tank drain plug (Figure 5-21).
Fuel Tank
Fuel Tank Drain Plug
Figure 5-21. Fuel Tank Drain Plug Location
4. Allow water and sediment to drain from fuel tank
into a suitable container. Dispose of waste properly
according to local laws and regualtions.
5. Reinstall drain plug (Figure 5-21).
LeeBoy Model 695 Motor Grader