LeeBoy 695 Operation, Service And Parts Manual page 114

Motor grader
Table of Contents

Advertisement

Maintenance
Low Idle (minimum allowed)
At Rated (minimum allowed)
Oil Regulating Valve-Opening Pressure Range
Oil Filter Differential Pressure To Open Bypass
Lubricating Oil Filter Capacity
Oil Type
Pan Only
Oil Filter Capacity
Total System
High To Low (on dipstick)
Wear eye protection and chemical
resistant gloves when using solvent for
cleaning purposes. Some solvents can
cause skin irritation and eye damage.
13. Dry using compressed air.
Wear eye protection when using
compressed air for drying or cleaning
components.
Never point an air nozzle at another
individual.
Use a safety reduction valve to reduce
air pressure to a safe level. Compressed
air can cause serious personal injury if
misused.
14. Inspect the wheel bearings and cups for pitting,
scoring, wear, and damage. Inspect bearing cage
to ensure it is not loose or damaged. Replace as
necessary.
15. Using clean wheel bearing grease, pack the
bearings.
16. Apply wheel bearing grease to the inner hub and
cup areas.
17. Place inner bearing in hub.
18. Place seal in hub.
19. Install wheel hub with inner bearing and seal on the
axle spindle assembly.
20. Place the outer bearing in the outer cup.
5-18
OIL PRESSURE SPECIFICATIONS
Oil Capacity of Standard Engine (four-cylinder)
4.5 liters (275 C.I.D.) Engines (Suspended Oil Pan)
10 psi (69 kPa)
30 psi (207 kPa)
65 psi (448 kPa) to 75 psi (517 kPa)
50 psi (345 kPa)
1 qt (0.95 liters)
15W-40
11.6 qt (11 liters)
1.0 qt (0.9 liters) Filter Capacity
13.7 qt (13 liters)
2.0 qt (1.9 liters)
21. Install outer cup on wheel hub.
22. Secure bearing with flat washer and slotted
mounting nut.
23. Tighten mounting nut while rotating wheel assembly.
When wheel becomes hard to turn, back nut off 1/6
of a turn.
24. Install cotter pin in mounting nut. Replace with new
matching cotter pin if necessary.
25. Tighten the wheel lug nuts alternately in a star
pattern 360 ft. lbs. (488 N•m).
26. Inflate tire to 40 PSI.
27. Install bearing cap.
28. Lower grader
29. Remove blocking.
LeeBoy Model 695 Motor Grader

Advertisement

Table of Contents
loading

Related Products for LeeBoy 695

Table of Contents