Table of Contents
Advertisement
ITEM
CONTROL NAME
NO.
1
Dozer Float Switch (with front
blade option)
2
Engine Stop Light
3
Engine Warning Indicator
Light
4
Wait-To-Start Indicator Light
(Amber)
5
Air Filter Restriction Indicator
Light (Amber)
6
Left Turn Signal Light
(Green)
7
Head Light High Beam (Blue) Indicates headlight high beams are on when illuminated.
8
Parking (Hand) Brake Light
(Red)
9
Service Brake Failure Light
(Red)
10
Primary Steering System
Status Light
11
Secondary Steering System
Status Light (Amber) (Option)
LB Performance Model 695 Motor Grader
Table 3-5. Steering Console
On motor graders equipped with optional front attachment lift float
capabilities, float control switch is located on front of pedestal head. To
activate float action, depress top of switch (ON). To deactivate float action,
depress bottom of switch (OFF).
Displays fault code.
Do not operate motor grader if engine stop light is
flashing. Refer to an authorized LeeBoy Dealer and engine
operator's manual.
Displays fault code. Flashing indicates timely operator attention is required.
Do not operate motor grader if engine warning indicator
light is flashing. Refer to an authorized LeeBoy Dealer and
engine operator's manual.
During cold weather start-up, illuminates to indicate motor grader is warming
up. Wait for light to turn off, indicating motor grader warm-up is complete,
before starting motor.
Indicates air cleaner needs to be cleaned or primary air filter needs to be
replaced when illuminated.
Flashes to indicate that left turn signal is on. Light also flashes, together with
right turn signal indicator, when hazard flasher switch is activated.
When ignition is turned to ON, light and alarm activate to indicate hand brake
is engaged. Light and alarm wlll remain on during engine start-up until brake
is released.
DO not operate grader if light and alarm do not turn on. The brake
system is faulty and must be repaired by a qualified service
technician.
When ignition is turned to on, the light will briefly illuminate and then turn off
to indicate that the service brake is operating correctly. In the event of a
malfunction, the light will remain illuminated.
Do not operate grader if light does not turn on or if the
light stays illuminated for an extended period. The brake
warning system is faulty and must be repaired by a qualified
service technician.
INDICATES low steering hydraulic pressure. Light will activate when
secondary steering system activates. SECONDARY STEERING
OPTION ONLY.
Indicates secondary steering system activated. Turns on simultaneously with
the primary steering system light.
Secondary steering option is an auxiliary hydraulic system that in the event
of loss of hydraulic flow to the steering unit, makes steering corrections
easier. Ignition key must be in ON (
The system will also turn on when test switch is activated.
Operate the secondary steering system only long
enough to make a steering correction — maximum 2 minutes.
Component Location
FUNCTION
) position for this system to function.
3 3
3-13
Advertisement
Table of Contents
