MSD-72 Series User's Guide
8.4 Menu operation
You can register the control command to turn on/off the sink device. Press the key to send the control
command to the sink device.
DI SPLAY
POWER
1
2
3
4
[Figure 8.4] Sink device power supply key
Note:
If power a ON/OFF control command is sent to a sink device and reply command of normal termination is sent
from the sink device, the "DISPLAY POWER" key turns orange (when powered ON) or the key light turns off
(when powered OFF)
If the reply command from the sink device is not checked, the actual power status of the sink device and the
LED may not match.
8.5 Command control
Executing control commands which are registered and linked to external command keys (COMMAND A to
COMMAND I). No commands are registered as Factory default setting. Register and link commands to
external command keys.
32
IN 1
IN 2
[Table 8.4] Sink device power supply key
Sink device power status
Power ON
Power OFF
【See: 9.12.3 Command link】
LED
Lights (orange)
Turned off
【See: 9.12.3 Command link】