User Safety - Biotek Synergy HT Operator's Manual

User Safety

This device has been type-tested by an independent laboratory and found to meet the
requirements of the following:
•
Underwriters Laboratories UL 61010-1, "Safety requirements for electrical
equipment for measurement, control and laboratory use; Part 1: General
requirements."
•
Canadian Standards Association CAN/CSA C22.2 No. 61010-1, "Safety
requirements for electrical equipment for measurement, control and laboratory
use; Part 1: General requirements."
•
EN 61010 Standards, see
Synergy HT Operator's Manual
CE Mark starting on page xv.
xvii
User Safety
|