Recommended Maintenance Schedule - Biotek Synergy HT Operator's Manual

Recommended Maintenance Schedule

The following charts recommend Preventive Maintenance tasks and the frequency
with which each task should be performed.
It is important to note that the risk and performance factors associated
with your assays may require that some or all of the procedures be
performed more frequently than presented in the schedule.
Task
All models:
Clean exposed surfaces
Inspect/clean excitation and emission
filters (if equipped)
Decontamination
Models with injectors only:
Flush/purge the fluid path
(Optional) Run Dispense protocol
Empty/clean tip prime trough
Clean priming plate
Clean internal components tubing and
injector heads
Clean optical probes
Clean internal surfaces
Synergy HT Operator's Manual

Recommended Maintenance Schedule |

Page Daily
99
100
see App
before shipment or storage
A
101
102
103
103
111
112
120
Quarterly As Needed
97