Biotek Synergy HT Operator's Manual page 14

x
Preface
|
Rev Date Changes
K 7/2012 General: Updated instructions to include terminology changes in Gen5 v2.x;
added support for the Take3 and Take3 Trio plates; added text to indicate
sections that apply only to certain models (i.e., models with a dispenser)
Preface: Updated date and revision on title page and in Notices; in "Hazards,"
added "Service" and "Accessories" warnings; in "Precautions," added "Spare
Parts" caution; updated CE Mark text.
Chapter 1, Introduction: Updated the format of "Package Contents" and "Optional
Contents".
Chapter 2, Installation: Added "Try a different COM Port" to "12: Establish
Communication."
Chapter 4, Qualification: Updated the Absorbance Plate Test section
L 10/2012 Preface: Added a warning to use two people to lift/carry the instrument. Updated
the dispense module pinch hazard warning text and symbols. Updated the CE
Mark information to include EN 61010-2-081 and EN 61010-2-010.
Chapter 2, Installation: Added a warning to use two people to lift/carry the
instrument.
BioTek Instruments, Inc.