Biotek Synergy HT Operator's Manual page 139

113
Clean the Internal Components |
Take a moment to identify the components discussed in this section:
Heater/thermistor
connectors (2)
Thumbscrew
to access
ground wire
Thumbscrews (2, black)
for holding the incubator
housing in place
Top optical probe
Screw for lowering
and raising the top
optical probe
Incubator
Top probe hanger, with
housing
two shoulder screws
Figure 32: Internal components to be removed/adjusted for cleaning the optic probes
Synergy HT Operator's Manual