Edge-Core AS6700-32X Cli Reference Manual page 1088

Glossary
Private VLANs
Private VLANs provide port-based security and isolation between ports within the assigned
VLAN. Data traffic on downlink ports can only be forwarded to, and from, uplink ports.
QinQ
QinQ tunneling is designed for service providers carrying traffic for multiple customers
across their networks. It is used to maintain customer-specific VLAN and Layer 2 protocol
configurations even when different customers use the same internal VLAN IDs.
QoS
Quality of Service. QoS refers to the capability of a network to provide better service to
selected traffic flows using features such as data prioritization, queuing, congestion
avoidance and traffic shaping. These features effectively provide preferential treatment to
specific flows either by raising the priority of one flow or limiting the priority of another
flow.
RADIUS
Remote Authentication Dial-in User Service. RA is a logon authentication protocol that
DIUS
uses software running on a central server to control access to RADIUS-compliant devices on
the network.
RIP
Routing Information Protocol seeks to find the shortest route to another device by
minimizing the distance-vector, or hop count, which serves as a rough estimate of
transmission cost. RIP-2 is a compatible upgrade to RIP. It adds useful capabilities for subnet
routing, authentication, and multicast transmissions.
RMON
Remote Monitoring. RMON provides comprehensive network monitoring capabilities. It
eliminates the polling required in standard SNMP, and can set alarms on a variety of traffic
conditions, including specific error types.
RSTP
Rapid Spanning Tree Protocol. RSTP reduces the convergence time for network topology
changes to about 10% of that required by the older IEEE 802.1D STP standard.
SMTP
Simple Mail Transfer Protocol is a standard host-to-host mail transport protocol that
operates over TCP, port 25.
SNMP
Simple Network Management Protocol. The application protocol in the Internet suite of
protocols which offers network management services.
SNTP
allows a device to set its internal clock based on periodic
Simple Network Time Protocol
updates from a Network Time Protocol (NTP) server. Updates can be requested from a
specific NTP server, or can be received via broadcasts sent by NTP servers.
– 1088 –