Ipv6 Pim Override-Interval - Edge-Core AS6700-32X Cli Reference Manual

Related Commands

ipv6 pim override-interval (1053)

ipv6 pim propagation-delay (1054)
ipv6 pim
This command configures the override interval, or the time it takes a downstream
override-interval router to respond to a lan-prune-delay message. Use the no form to restore the
default setting.
Syntax
Default Setting
2500 milliseconds
Command Mode
Interface Configuration (VLAN)
Command Usage
The override interval configured by this command and the propagation delay
configured by the
LAN prune delay. If a downstream router has group members which want to
continue receiving the flow referenced in a LAN prune delay message, then the
override interval represents the time required for the downstream router to process
the message and then respond by sending a Join message back to the upstream
router to ensure that the flow is not terminated.
Example
Console(config-if)#ipv6 pim override-interval 3500
Console(config-if)#
Related Commands
ipv6 pim propagation-delay (1054)
ipv6 pim lan-prune-delay (1052)
ipv6 pim override-interval milliseconds
no ipv6 pim override-interval
milliseconds - The time required for a downstream router to respond to a
lan-prune-delay message by sending back a Join message if it wants to
continue receiving the flow referenced in the message. (Range: 500-6000
milliseconds)
ipv6 pim propagation-delay
– 1053 –
Chapter 30
| Multicast Routing Commands
PIM Multicast Routing
command are used to calculate the