Show Ip Igmp Snooping - Edge-Core ES3510MA Management Manual

C
OMMAND
◆ Static multicast entries are never aged out.
When a multicast entry is assigned to an interface in a specific VLAN,
◆
the corresponding traffic can only be forwarded to ports within that
VLAN.
E
XAMPLE
The following shows how to statically configure a multicast group on a port.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet 1/5
Console(config)#
This command shows the IGMP snooping, proxy, and query configuration
show ip igmp
settings.
snooping
C
OMMAND
Privileged Exec
C
OMMAND
This command displays global and VLAN-specific IGMP configuration
settings. See
page 444
E
XAMPLE
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP snooping
Router port expire time
Router alert check
Tcn flood
Tcn query solicit
Unregistered data flood
Unsolicited report interval
Version exclusive
Version
Proxy reporting
Vlan 1:
--------
IGMP snooping
IGMP snooping running status
Immediate leave
Last member query interval
Last member query count
Proxy query address
Version
Proxy query interval
Proxy query response interval
Version exclusive
General query suppression
Proxy reporting
Multicast Router Discovery
.
U
SAGE
M
ODE
U
SAGE
"Configuring IGMP Snooping and Query Parameters" on
for a description of the displayed items.
– 865 –
| Multicast Filtering Commands
C 37
HAPTER
: Enabled
: 300 s
: Disabled
: Disabled
: Disabled
: Disabled
: 400 s
: Disabled
: 2
: Enabled
: Enabled
: Inactive
: Disabled
: 10 (1/10s)
: 2
: 0.0.0.0
: Using global version (2)
: 125 s
: 100 (1/10s)
: Disabled
: Disabled
: Using global status (Enabled)
: Enabled
IGMP Snooping