Installing An Optional Tape Drive - Lenovo x3300 M4 7382 Installation And Service Manual

Hide thumbs Also See for x3300 M4 7382:

Table of Contents

3. Turn off the server (see "Turning off the server" on page 24) and all attached peripheral devices.

Disconnect all power cords; then, disconnect all external cables from the server.

4. Unlock and remove the left-side cover (see "Removing the left-side cover" on page 39)

5. Open the bezel (see "Removing the bezel" on page 191)

6. Touch the static-protective package that contains the DVD drive to any unpainted metal surface on the

server; then, remove the DVD drive from the package.

7. Install the drive rail on the DVD drive.

8. Align the drive rail on the DVD drive; then, slide the DVD drive into the drive bay until the rail click into

right place.

9. Connect power and signal cables to the drive and the connectors on the system board (see "Internal

Cable Routing and Connectors" on page 172).

If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on

Installing an optional tape drive

Use this information to install an optional tape drive into the server.

To install an optional full-height tape drive, complete the following steps:

1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on page 36.

2. Turn off the server (see "Turning off the server" on page 24) and all attached peripheral devices.

Disconnect all power cords; then, disconnect all external cables from the server.

3. Unlock and remove the left-side cover (see "Removing the left-side cover" on page 39)

4. Open the bezel (see "Removing the bezel" on page 191)

5. Remove the EMC shields from the drive bay, if installed.

6. Touch the static-protective package that contains the DVD drive to any unpainted metal surface on the

server; then, remove the DVD drive from the package.

7. Install the drive rail on the tape drive, using the holes nearest the center of the drive.

8. Follow the instructions that come with the drive to set jumpers or switches, if there is any.

System x3300 M4 Installation and Service Guide

System x3300 m47382