Table of Contents
Advertisement
6. Remove the fan assembly (see "Removing the fan assembly" on page 267).
7. Remove the existing adaptor (see "Removing an adapter" on page 217).
8. See the documentation that comes with the adapter for any cabling instructions and information about
jumper or switch settings. (It might be easier for you to route cables before you install the adapter.)
9. Touch the static-protective package that contains the adapter; then, remove the adapter from the
package.
10. Determine the PCI slot into which you will install the adapter.
11. Press down the latch of the adapter-retention brackets to the open position from the rear side of the
server.
12. Remove the PCI slot filler, if installed. Keep the filler in a safe place for potential future use.
13. Press the adapter firmly into the expansion slot.
222
System x3300 M4 Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
