Lenovo x3300 M4 7382 Installation And Service Manual page 31

• NMI button: Press this button to force a nonmaskable interrupt to the microprocessor. It allows you to
blue screen the server and take a memory dump (use this button only when directed by the Lenovo
service support). You might have to use a pen or the end of a straightened paper clip to press the button.
• PCI-e slot 1: Insert a half-length, full-height PCI Express adapter or a PCI-X interposer card into this slot.
See "Installing an adapter" on page 61 for the supported adapters for these riser-cards.
Note: It only functional when the microprocessor 2 installed.
• PCI-e slot 2: Insert a full-length, full-height PCI Express adapter into this slot. See "Installing an adapter"
on page 61 for information about adapters that this riser card support.
• PCI-e slot 3: Insert a half-length, full-height PCI Express adapter into this slot. See "Installing an adapter"
on page 61 for information about adapters that this riser card support.
• PCI-e slot 4: Insert a full-length, full-height PCI Express adapter into this slot. See "Installing an adapter"
on page 61 for information about adapters that this riser card support.
• PCI-e slot 5: Insert a half-length, full-height PCI Express adapter into this slot. See "Installing an adapter"
on page 61 for information about adapters that this riser card support.
• PCI-e slot 6: Insert a half-length, full-height PCI Express adapter into this slot. See "Installing an adapter"
on page 61 for information about adapters that this riser card support.
Note: It has PCI-X capability by using PCI-e to PCI-X converter kit of Lenovo System x3500 M4 Type
7383.
• Power connector: Connect the power cord to this connector.
• Video connector: Connect a monitor to this connector.
Note: The maximum video resolution is 1600 x 1200 at 75 Hz.
• Serial connector: Connect a 9-pin serial device to this connector. The serial port is shared with the
Integrated Management Module II (IMM2). The IMM2 can take control of the shared serial port to redirect
serial traffic, using Serial over LAN (SOL).
• USB connectors: Connect a USB device, such as a USB mouse or keyboard to any of these connectors.
• Ethernet connectors: Use either of these connectors to connect the server to a network.
.
Chapter 1 The Lenovo System x3300 M4 Type 7382 server
19