9. For server models with four 3.5-inch hot-swap hard disk drives with the redundant power supply:
Note: It is necessary to use one 2*8 pins to 2*7 pins power cable for these server models come with a
redundant power supply.
10. For server models with four 3.5-inch hot-swap hard disk drives with the redundant power supply and the
serveRAID adapter:
Note: It is necessary to use one 2*8 pins to 2*7 pins power cable for these server models come with a
redundant power supply.
.
183
Chapter 6
Removing and replacing components