Lenovo x3300 M4 7382 Installation And Service Manual page 105

The UEFI Setup Utility program is part of the basic input/output system firmware. To change the startup-
device sequence, set the date and time, and set passwords. For information about using this program,
see "Using the Setup utility" on page 95.
• Boot Manager program
The Boot Manager program is part of the server firmware. Use it to override the startup sequence that is
set in the Setup utility and temporarily assign a device to be first in the startup sequence. For more
information about using this program, see "Using the Boot Manager program" on page 101.
• LenovoServerGuide Setup and Installation CD
The ServerGuide program provides software-setup tools and installation tools that are designed for the
server. Use this CD during the installation of the server to configure basic hardware features, such as an
integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating
system. For information about using this CD, see "Using the ServerGuide Setup and Installation CD" on
page 94.
• Integrated Management Module
Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor
data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information
about using the IMM, see "Using the integrated management module II" on page 102 and the Integrated
Management Module User's Guide at
.
migr-5086346
• VMware ESXi embedded hypervisor
An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase.
Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the
same time. The USB embedded hypervisor flash device installs in the USB connector on the system
board. For more information about using the embedded hypervisor, see "Using the embedded hypervisor"
on page 103.
• Remote presence capability and blue-screen capture
The remote presence and blue-screen capture features are integrated functions of the Integrated
Management Module II (IMM2). The remote presence feature provides the following functions:
– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system
state
– Remotely accessing the server, using the keyboard and mouse from a remote client
– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO
and diskette image files as virtual drives that are available for use by the server
– Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the server
when the IMM detects an operating-system hang condition. A system administrator can use the blue-
screen capture feature to assist in determining the cause of the hang condition.
• Ethernet controller configuration
For information about configuring the Ethernet controller, see "Configuring the Gigabit Ethernet controller"
on page 106.
• Configuring RAID arrays
For information about configuring RAID arrays, see "Configuring RAID arrays" on page 107.
• Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings. Use
the ASU program online or out of band to modify UEFI settings from the command line without the need to
restart the server to access the Setup utility. For more information about using this program, see
"Advanced Settings Utility program" on page 109.
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=
Chapter 3
.
Configuration information and instructions
93