Interfaces, Connectors, Switches, Control Terminals, Leds On The Cu - Siemens SINAMICS G120 Original Instructions Manual

Sinamics g120 inverter with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

4.4 Installing Control Unit

Interfaces, connectors, switches, control terminals, LEDs on the CU

Interfaces at the front of the Control Unit

To access the interfaces at the front of the Control Unit, you must lift the Operator Panel (if

one is being used) and open the front doors.

Memory card slot

Select the fieldbus address:

• CU230P-2 DP

• CU230P-2 CAN

• CU230P-2 HVAC

• CU230P-2 BT

Connection to the Operator Panel

Terminal strips

Switch for AI2

(current/temperature)

Switch for AI0 and AI1 (U/I)

0/4 mA ... 20 mA

• U -10/0 V ... 10 V

USB interface for connection to a PC

Terminal strips for the digital outputs

Inverter with CU230P-2 Control Units

Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG

Sinamics g120d Cu230p-2