Wiring Examples For The Factory Settings - Siemens SINAMICS G120 Original Instructions Manual

Sinamics g120 inverter with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Wiring examples for the factory settings

If you wish to use the factory setting of your inverter, then you must wire the terminal strip of

your inverter as shown in the following examples.

Pre-assignment of the terminal strip for CU230P-

2 HVAC and CU230P-2 CAN

Inverter with CU230P-2 Control Units

Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG

5.2 Preparing for commissioning

Pre-assignment of the terminal strip for CU230P-

2 DP and CU230P-2 PN

DI 3 = LOW: PROFIdrive telegram 1

DI 3 = HIGH: Jogging

Commissioning

Sinamics g120d Cu230p-2