Generating A Starter Project; Go Online And Start Wizard For Basic Commissioning - Siemens SINAMICS G120 Original Instructions Manual

Commissioning
5.4 Basic commissioning
5.4.2.2

Generating a STARTER project

Creating a STARTER project using project wizards
Procedure
To create a project with the STARTER project Wizards, proceed as follows:
1. Using "Project / New with
wizard" create a new project.
2. To start the wizard, click on
"Search online for drive
units ...".
3. Follow the instructions of the
Wizard, and set everything that
you require for your particular
project.
You have created your STARTER project.
5.4.2.3

Go online and start wizard for basic commissioning

Procedure
Proceed as follows to start the basic commissioning online with the converter:
1. Select your project and go online:
2. Select the device or the devices with which you wish
to go online.
3. Download the hardware configuration found online in
your project (PG or PC). STARTER shows you
which converter it is accessing online and which
offline:
②
③
4. When you are online, double-click on "Control Unit".
5. Start the wizard for basic commissioning.
You are online and have started basic commissioning.
88
The converter is online
The converter is offline
.
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
Inverter with CU230P-2 Control Units