Siemens SINAMICS G120 Original Instructions Manual page 214

Configuring the fieldbus
7.7 Communication over CANopen
OD Sub- Object name
index index
(hex) (hex)
2 Transmission type
3 Inhibit time
4 Reserved
5 Event timer
1807 Transmit PDO 8 communication parameter
0 Largest subindex supported
1 COB ID used by PDO
2 Transmission type
3 Inhibit time
4 Reserved
5 Event timer
Table 7- 30 TPDO configuration objects - mapping parameters
OD Sub- Object name
index index
(hex) (hex)
1A00 Transmit PDO 1 mapping parameter
0 Number of mapped application objects in PDO
1 PDO mapping for the first application object to be
mapped
2 PDO mapping for the second application object to
be mapped
3 PDO mapping for the third application object to be
mapped
4 PDO mapping for the fourth application object to
be mapped
1A01 Transmit PDO 2 mapping parameter
0 Number of mapped application objects in PDO
1 PDO mapping for the first application object to be
mapped
2 PDO mapping for the second application object to
be mapped
3 PDO mapping for the third application object to be
mapped
4 PDO mapping for the fourth application object to
be mapped
1A02 Transmit PDO 3 mapping parameter
0 Number of mapped application objects in PDO
1 PDO mapping for the first application object to be
mapped
2 PDO mapping for the second application object to
be mapped
214
SINAMICS Data
parameters type
p8726.1 U8
p8726.2 U16
p8726.3 U8
p8726.4 U16
U8
p8727.0 U32
p8727.1 U8
p8727.2 U16
p8727.3 U8
p8727.4 U16
SINAMICS Data type
parameters
U8
p8730.0 U32
p8730.1 U32
p8730.2 U32
p8730.3 U32
U8
p8731.0 U32
p8731.1 U32
p8731.2 U32
p8731.3 U32
U8
p8732.0 U32
p8732.1 U32
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
Predefined Can be
connection set read/
written
FE hex r/w
0 r/w
--- r/w
0 r/w
5 r
C000 06DF hex r/w
FE hex r/w
0 r/w
--- r/w
0 r/w
Predefined Can be
connection read/
set written
1 r/w
6041 hex r/w
0 r/w
0 r/w
0 r/w
2 r/w
6041 hex r/w
6044 hex r/w
0 r/w
0 r/w
0 r/w
0 r/w
0 r/w