Adapting the terminal strip
6.1
Overview
This chapter describes how you adapt the function of individual inputs and outputs of the
inverter.
If you adapt the function of an input or output, you overwrite the settings made during the
basic commissioning.
See also the following chapter:
● Basic commissioning (Page 80)
● Selecting the pre-assignment for the terminal strip (Page 63)
● Interconnecting signals in the converter (Page 425)
Figure 6-1
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
Internal interconnection of the inputs and outputs
6
93