Step/Knob Ratio; Store To File - Agilent Technologies E8241A User Manual

Step/Knob Ratio

Supported
This softkey enables you to set the ratio between the increment value of the step keys
and the front panel knob. For example, if you set the increment value for frequency to
1.0 MHz and set the step/knob ratio to 10/1, when frequency is the active function the up
and down arrow keys will change the frequency in 1.0 MHz steps and the front panel
knob will change the frequency in 1/10th of 1.0 MHz steps.
When you press
represents the arrow keys step size in the ratio. To enter a new value, rotate the front
panel knob until the desired value is displayed, use the up and down arrow keys, or
enter the value using the numeric keypad and press the
Preset
Range
Location
Remarks

Store to File

Supported
This softkey accesses a menu that enables you to create a file name and store the current
data to a file in the internal non-volatile memory.
Preset
Range
Location
Remarks
Chapter 5
All
the number displayed in the active entry area
Step/Knob Ratio
N/A
1−10,000
Page 248
This ratio applies only when you have a function active that has an
associated increment value. The step/knob ratio is not affected by a
preset or by a power cycle.
All
N/A
N/A
Page 234, Page 246
The file name can consist of up to 23 alpha-numeric and special
characters.
terminator key.
Enter
Key Reference
S
215